What is LED crystal film screen?
LED crystal film screen is a new type of transparent display screen. Its core technology is based on transparent film materials. Micro LED lamp beads are embedded in the film to achieve high-definition display while maintaining high light transmittance. This screen is thin, transparent, and high-brightness. It is very suitable for installation in glass curtain walls, windows, and other scenes that require transparent display effects.
LED crystal film screen breaks through the limitations of traditional display screens that are heavy and opaque. It is widely used in commercial advertising, showrooms, interior decoration, exhibitions, and other fields, providing audiences with a new visual experience.
Common pixels of LED crystal film screens
P3-P5:
The dot pitch is small, the display is clear and delicate, and it is suitable for close viewing.
Commonly used for exhibitions, indoor commercial windows, etc.
P6-P10:
The dot pitch is large, suitable for medium and long distance viewing, taking into account both cost and display effect.
Commonly used for large glass curtain walls, conference center facades, etc.
P10 and above:
The display effect is suitable for long-distance viewing, and is mostly used for large-area transparent advertising screens, such as shopping mall facades.
Installation location of LED crystal film screen
Glass curtain wall
Glass exterior walls such as shopping malls and office buildings are the main application scenarios of LED crystal film screen. The screen is installed on the inside of the glass, which will not damage the overall beauty of the building, while taking into account the needs of advertising display and lighting.
Commercial window
In retail stores and high-end brand stores, crystal film screens are widely used for window displays. The screen can play dynamic advertisements while maintaining the visibility of the store display to attract more customers’ attention.
Exhibition display
For exhibitions, museums, science and technology museums and other exhibition venues, LED crystal film screens can provide a sense of science fiction and modern display effects.
Indoor decoration
Some high-end places, such as hotel lobbies, conference rooms, etc., use crystal film screens as decorative display screens to create a modern and technological indoor environment.
How to install LED crystal film screen
The installation process of LED crystal film screen is relatively simple, but you need to pay attention to details to ensure the effect and safety. The following are common installation steps:
- Preliminary preparation
Measurement and design: Measure the size according to the installation location, design the screen size and fixing method.
Select materials: According to the glass type and load-bearing requirements, select the appropriate installation frame and pasting materials.
- Installation steps
Clean the surface: Make sure that the glass or wall is free of dust and oil to facilitate screen pasting.
Installation frame: If a large screen is required, you can first install a fixed frame on the glass to ensure that the screen is flat.
Paste the crystal film screen: Paste the LED crystal film film evenly on the glass surface and scrape it flat with a special tool to prevent bubbles.
Connect the power supply and control system: Connect the power and data cables of the screen to ensure stable signal transmission and normal screen display.
Debugging and fixing: Light up the screen, debug the brightness, contrast and display content; fix the screen firmly after confirming the effect.
- Safety and aesthetics
Ensure a firm installation to avoid safety hazards caused by the screen falling off.
Hide the power and data cables to maintain overall aesthetics.
